Buy & Ardex Feather Finish Rapid Drying Patching And Smoothing Compound 5kg Online

T: 01604 439300
E: [email protected]
Mon-Fri: 07:15 - 19.00
Sat: 08.00 - 12.00
Tools & Trim
  • Free UK delivery
    on most orders over £250 net*
  • Worldwide delivery
     
  • Finance Available
    on orders over £250
 

Ardex Feather Finish Rapid Drying Patching And Smoothing Compound 5kg

Rapid Set

No Priming Required

Easy To Mix & Apply, Just Add Water

Colour: Grey

Ideal For Patching & Smoothing Minor Surface Damage

Coverage: 4.2m² @ 1mm Thickness Per 5kg

Bag Size: 5kg  (Also Available In 11kg Bags)

£25.98 ex vat
£31.18 inc vat
in stock
Description
Specification
Attachments

ARDEX FEATHER FINISH is an ultra-rapid drying patching and smoothing compound, which provides a high bond strength to concrete, plywood, sand/cement screeds, existing smoothing compounds and ceramic tiles, without the need to prime.

Designed for use in commercial and domestic locations, prior to the installation of resilient floorcoverings such as luxury vinyl tiles or sheet vinyl etc. ARDEX FEATHER FINISH is ideal for the rapid skimming of plywood, patching, filling and feather finishing daywork joints, ridges, gouges, depressions, uneven trowel marks, etc., in the subfloor, as well as smoothing joints between staggered plywood sheets.

(Also Available In 11kg Bags)

NOTE: Suitable for use on heated cement/sand screeds.

Features:
- Floorcoverings can be installed after as little as 15 minutes.
- A 5kg bag will cover 4.5m² at 1mm thick, or approximately 22.5m² as a scratch coat.
- Ideal for patching and smoothing minor surface damage to levelling and smoothing compounds.
- Exceptional bond to plywood, concrete, smoothing compounds, terrazzo and ceramic tiles, without the need to prime.
- Easy to mix and apply, just add water.

Pot Life: Approximately 15 minutes at 2O°C.
Mixing: The mix ratio is 2 parts of ARDEX FEATHER FINISH powder to 1 part water (by volume). Add the powder to the required amount of clean water in a clean mixing container whilst stirring thoroughly until a slump-free mortar is produced.
An 11kg bag of ARDEX FEATHER FINISH, when used to smooth a plywood sub-floor, will give up to approximately 5Om² of coverage when a skim coat is applied. Thicker applications will reduce coverage, e.g. 10m² at a 1mm thickness.
Receive Floorcovering After: 15 minutes.
Depth: 3mm - 12mm (it is recommended to build up in thin applications or alternatively consult the ARDEX ARDURAPID A 45 datasheet).
Bag Size: 5kg (Also Available In 11kg Bags).
Colour: Grey.


Related Products