.jpg)
.jpg)
Ardex-Flex FS Flexible Wall & Floor Grout Narrow Joint 10kg (Multiple Colours Available)
35 Available Colours
Consistent, Streak-Free Results
Water Repellent & Dirt Resistant
Suitable For Joints Up To 4mm Wide
Internal & External Use
Suitable For Swimming Pools
Bag Size: 10kg
Please Note: Colours shown are for illustration purposes only and may vary slightly from the displayed image.
ARDEX-FLEX FS is a cement-based grouting compound with excellent flexible and water repellent properties, without the need to add a separate admix.
The BS EN 13888 classification for ARDEX-FLEX FS is CG2 WA, an “improved cementitious grout with additional characteristics of reduced water
absorption and high abrasion resistance”. ARDEX-FLEX FS is suitable for grouting joints up to 4mm wide, between porcelain, ceramic, non-moisture sensitive natural stone and quarry tiles, as well as extruded tiles and glass blockwork. The hardened grout is weather resistant, unaffected by water, and can be used for internal and external tiling in dry and wet locations, including swimming pools with non-aggressive water conditions. ARDEX-FLEX FS can be applied to both wall and floor tile joints and can receive foot traffic after 5 hours at 20°C.
- Consistent, streak-free results
- Water-repellent and dirt resistant
- Ideal for commercial and domestic environments such as swimming pools, showers and kitchens
- Suitable for joints up to 4mm wide
- Ideal for almost all tile types including non-moisture-sensitive natural stone
- Suitable for wall and floor applications
- Suitable for internal and external areas, including swimming pools
- Suitable for use with underfloor heating
- Available in 35 different colours to suit any tiling installation
ARDEX ST Elastic Silicone Sealant is available in Transparent & 13 colours designed to match the most popular ARDEX-FLEX Flexible Tile Grout colours
Working time: approx. 2.5 hours
Initial Set (Vicat) approx. 3 hours
Final Set (Vicat) approx. 4 hours
Bulk density of powder approx. 1.2 kg/litre
Density of fresh mortar approx. 1.9 kg/litre
Brinell Hardness
~ After 1 day, approx. 25.0 N/mm²
~ After 3 days, approx. 40.0 N/mm²
~ After 7 days, approx. 55.0 N/mm²
Bag Size: 10kg
Mixing: A 10kg bag of ARDEX-FLEX FS requires approximately 3 litres of water.
Working Time: Approximately 2½ hours at 20°C
Walkable After: 5 hours
Storage: ARDEX-FLEX FS must be stored in unopened packaging, clear of the ground, in cool dry conditions and be protected from excessive
draught. If stored correctly, as detailed above, the shelf life of this product is 12 months from the date shown on the packaging.
Hazard Information: ARDEX-FLEX FS contains more than 20% Portland cement and, therefore, in line with current legislation, is classified as irritating to eyes and skin. For this reason, the following precautions should be observed:- Avoid contact with skin and eyes; in case of contact with the eyes, rinse immediately with plenty of water and seek medical advice; wear suitable gloves and keep the product out of the reach of children. Avoid the generation of airborne dust during mixing.
