DEVIcomfort Loose Lay Cable DTIR-10
Multiple Sizes Available
Quick & Easy To Install
100% Aluminium Earth Shield
4mm Cable Thickness
4-Metre Cold Tail
10W/m @ 230V Output
DEVI DTIR-10 loose lay cables provide the best flexibility of layout; the cable can be installed within tile adhesive/smoothing compound and many other floor coverings.
To ensure a long lifetime, all DEVI Underfloor Heating Loose Lay Cables are minutely inspected including tests for Ohmic resistance, high voltage and material controls to ensure quality.
Please ensure all Safety Guidelines are adhered to during and after the installation of this product. Please be aware, that we advise you to choose a cable kit that covers 90% of your floor area. You CAN NOT cut the cables, therefore, it is best to order slightly less than you need.
Features:
- Quick and easy to install
- 100% aluminium earth shield
- 4mm cable thickness
- 4-metre cold tail
- 10W/m @ 230V output
- Bending Radius – Min 30mm
- Typical application areas: Indoor floor heating in domestic and public buildings.
- Very thin floors – Perfect for renovating projects.
- Lead-free, Flame retardent & fits into Devicell™ (If Covered By DEVI Alutape)
Spacing:
- 50mm spacings 2 Studs = 200W/m² (NOT FOR USE WITH DURA ORIGINAL MATTING)
- 50/75mm spacings 2/3 Studs = 150W/m²
- 75mm spacings 3 Studs = 133W/m²
- 100mm spacings 4 Studs = 100W/m²
Alternating between 2 & 3 Studs will achieve an average of roughly 150W m²
Operation Voltage: 220-240V~
Construction: Round, twin conductor with 360° screening, one cold tail
Output: 10W/m @ 230V~
Max. Permissible use temperature powered: 85°C
Max. Permissible use temperature, unpowered: 90°C
Cable thickness: 4mm
Deformation strength: 600N
Pulling strength: 120N
Conductor insulation: FEP
Outer sheath: PVC
Screen: 100% coverage, alu-foil, 0.5mm² tinned copper drain wire
Cold lead: 4m DTWB, 2 x 1.0mm², earthed
Min installation temp: -5°C
Bending radius: 6 x Ø
IP class: IPX7