DEVImat Contract DTIF-200 200w For Concrete Floors
Ideally Suited To Heating Tiled Concrete Floors As A Primary Heat Source
Also Suitable For Poorly Insulated Rooms Such As Conservatories
All-In-One Mat
Fast, Simple & Safe Installation
Long Life
DEVImat 200W/m² is an extremely high-quality, 360° fully screened twin conductor self-adhesive all-in-one mat with a tough red PVC outer sheath (non-UV stable). Its round profile, robust construction and low height ensure a fast, simple and safe installation which is perfect for renovating existing floors. Perfect for installing onto concrete floor constructions with poor insulation levels or rooms with high heat loss areas.
The cold lead is an installation cable with solid conductors ensuring fast installation. A clearly visible connection avoids accidentally installing the heated cable in the wall. To ensure a long lifetime, all cables are minutely inspected including tests for Ohmic resistance, high voltage and material controls to ensure quality. This means that they are proud to supply our full floor extended DEVIwarranty – which even includes floor replacement costs!
The DEVI underfloor heating mat is developed for a variety of applications. Using a DEVImat eases the installation as they are ready to roll out on the floor straight after taking out of the packaging.
Example:
The 2m² DTIF-200 is sufficient to give off good total warmth in a 6m² sized bathroom*. (*Calculated heat loss in 6m² sized bathrooms with 1 outer wall = 375W).
- Quick And Easy To Install
- 100% Aluminium Earth Shield
- 3mm Cable Thickness
- 2.3m Cold Tail
- 230Wm² @ 230V Output
- 20 Year Floor Guard Warranty
Operation Voltage: 220-240V~.
Construction: Round, Twin Conductor With 360° Screen, One Cold Lead.
Output: 150W/m² @ 230V~.
Max. Permissible Use Temperature, Powered: 115°C.
Max. Permissible Use Temperature, Unpowered: 120°C.
Cable Thickness: 3mm.
Deformation Strength: 600N.
Pulling Strength: 120N.
Conductor Insulation: FEP.
Outher Sheath: PVC.
Screen: 100% Coverage; Alu-Foil; 0.5mm² Tinned Copper Drain Wire.
Cold Lead: 2.3m DTWB, 2 x 1.0mm² With Screen.
Min Installation Temperature: -5°C.
Bending Radius: 50mm.
IP Class: IPX7.