.jpg)
.jpg)
DITRA-HEAT-E Heating Cable (sizes from 1.1m2 to 22.7m2)
Schlüter®-DITRA-HEAT-E Makes The Installation Of Underfloor Heating Simpler & Easier Than Ever Before
Combines The Flexibility Of Loose Heating Cables With The Ease Of Installation On Mat Systems
Cables Can Be Placed Wherever Heat Is Desired
Cables Ranging From 1.1m² (12.07LM) to 22.7m² (244.37LM)
In the Schlüter®-DITRA-HEAT-E system, heating cables are installed within the uncoupling mat. Thanks to the patented DITRA technology, the system for electrical floor heating can also be used on problematic substrates such as wooden beam structures, green screeds, or cracked subfloors without any risk of damage to the tile covering or the heating cables. Furthermore, the assembly prevents damage to the covering based on fast temperature fluctuations.
DITRA-HEAT combines the flexibility of loose heating cables with the ease of installation of mat systems.
Cables can be placed wherever heat is desired, without creating height differences in the floor.
Self-levelling compounds are not required to encapsulate the cables, significantly reducing installation time and effort.
Nominal voltage 230 Volt
Rating
~ 136 W/m² (spacing: every third stud ≙ 9 cm)
~ 200 W/m² (spacing: every second stud ≙ 6 cm)
Cold connection line 1 x 4,00 m
Minimum installation temperature 5 °C
Smallest bending radius 6 x dA
Resistance tolerance -5 % / +10 % at 20 °C
VDE tested IEC 60800 Class M1
Cold-warm transition Seamless, without shrink technology
Insulation Fluoroplastic
Fuse model IPX7
