Dural Durabase CI FH Underfloor Heating/Decoupling Mat 15m² Roll
Length: 15m Roll
Material: Polypropylene
Width: 1m
Colour: Yellow
Thickness: 6mm
Suitable for heating cables of 2 mm to 5 mm
For internal use
It is of vital importance that the installation of any underfloor heating system is preplanned. Care must be taken to understand the requirements of the heating system of your choice. The heating cable layout must be preplanned to avoid any “cross-overs”. The positioning of sensors and the power supply must be predetermined.
Maintaining the stud pattern alignment, the DURABASE CI-FH matting sections should be cut to size to cover the desired surface. If subject to heavy traffic, it is recommended that they be protected from damage by overlaying walk boards. For most surfaces, a water-based thin bed adhesive (C2 quality) can be used.
Please Note: The adhesive is applied to the subfloor using a serrated trowel (6 x 6 mm). You can then use a standard-size trowel to fix tiles on top.
DURABASE CI-FH is not suitable for external use.
When used with 2 mm cables, it is advisable to incorporate a 3-stud locking loop every 30cm. This ensures the cable is retained under tension.