Isomat Multifill Elastic Colour Match Silicone 280ml (Choice of Colours)
One-component, colored, elastic tile joint sealant.
Used on walls or floors, especially where high elasticity is required (expansion joints etc.).
Suitable for indoor and outdoor applications.
280ml
One-component, colored, elastic joint sealant.
It offers high elasticity, excellent adhesion to the substrate and resistance to moisture, temperature variations (-40°C to +150°C) and weather exposure.
Suitable for joint width 3-40 mm
MULTIFILL-ELASTIC is used for pointing tile joints on walls or floors, especially where high elasticity is required (expansion joints etc.). In case of grouting on natural or artificial stones, such as marble and granite, please contact ISOMAT’s Technical Support Department. Suitable for indoor and outdoor applications.
Basis: polymer resin
Application temperature: +5°C to +40°C
Film formation: after 10-20 min
Curing speed: 2-3 mm/day
Elastic modulus (ISO 8339): 0.60 N/mm2
Joint movement capability: 25%
Elastic recovery: approx. 90%
Hardness (Shore A): 25
Substrate preparation
The joint must be clean, dry and free from dust, oil, grease etc. To avoid undesirable soiling at joint edges, a self-adhesive papertape is applied along the joint edges.
Application
The cartridge is inserted in the special gun and the nozzle is cut slantwise, so that it does not fit into the joint, but barely touches and slides along the edges. MULTIFILL-ELASTIC is applied by moving the cartridge along the joint axis at a 450 angle. While material is still fresh, spray the joint with water and in the end, press the surface smooth with your finger. Remove the selfadhesive paper-tape, immediately after application.
Shelf-life is 12 months, in dry and frost-free conditions.