Kerakoll Aquastop Nanoflex Eco-Friendly Waterproofing Membrane 20kg
For Internal & External Use
Breathable
Crack-Bridging At Low Temperatures
Nanotech Water Repellent Technology
Suitable For Overlaying
30% Better Coverage Than Two-Component Systems
Coverage: 1.15kg Per m²
Colour: Light Grey
Bag Size: 20kg
Certified, eco-friendly, breathable, anti-alkali and chlorine-resistant, mineral membrane for the flexible waterproofing with high levels of adhesion and durability of substrates before laying with adhesives, ideal for use in GreenBuilding. Single-component with low CO2 emissions and very low volatile organic compound emissions, recyclable as an inert material at the end of its life.
Aquastop Nanoflex® develops a smooth, fluid mixture that can be adjusted by varying the amount of water in order to obtain optimal workability for the particular site conditions, guaranteeing maximum adhesion of the bonded system.
Use:
Terraces, balconies, horizontal surfaces and swimming pools on mineral screeds, monolithic cement-based screeds, existing floors
covered with ceramic and marble tiles, dimensionally stable natural stone well-anchored to the substrate and clean, cement-based
plasters/renders and cementitious mortars, aged concrete.
Do not use on gypsum or anhydrite-based substrates without the use of Primer A Eco eco-friendly, water-based surface isolation, on metal or wood substrates, on bituminous sheeting, to waterproof exposed surfaces subject to foot traffic, on low-density screeds, on insulation layers on inverted roofs made with insulating panels or low-density materials, in swimming pools and tanks used to hold exposed water, when adhesion of the coverings requires the use with Biogel® Extreme® or reactive adhesives.
Appearance: Light grey ready-mixed waterproofing product
Apparent volumetric mass: 1kg/dm³
Mineralogical nature of inert material: Silicate - crystalline carbonate
Shelf life: ≈ 12 months in the original packaging in dry environment
Pack: 20kg bag with handle
Mixing water: ≈ 5 – 6ℓ/1 20kg bag
Viscosity: ≈ 60,000 mPas · sec
Specific weight of the mixture: ≈ 1.5 kg/dm3 UNI 7121
Pot life: ≥ 1 hr
Temperature range for application: From +5 °C to +35 °C
Substrate residual humidity: ≤ 4%
Minimum total thickness: ≥ 2mm
Maximum thickness per layer: ≤ 1.5mm
Waiting time between 1st and 2nd coat: ≥ 6 hrs
Waiting time before laying the covering*: ≥ 24 hrs
Interval before normal use: ≈ 7 days / ≈ 14 days (permanent water)
Working temperature from: -20°C to +90°C
Coverage: ≈ 1.15 kg/m² per mm of thickness