Buy Waterproofing & Shower Trays & Mapei Shower Waterproofing Kit 4m² Online

T: 01604 439300
E: [email protected]
Mon-Fri: 07:15 - 19.00
Sat: 08.00 - 12.00
Tools & Trim
  • Free UK delivery
    on most orders over £250 net*
  • Worldwide delivery
     
  • Finance Available
    on orders over £250
 

Mapei Shower Waterproofing Kit 4m²

Ready To Use

Rapid Application

Excellent Elongation Properties

No Reinforcement Required

Coverage: Approximately 4m² (800x800mm corner shower enclosure)

Contents:
  ~ Shower Waterproofing Kit Primer 0.5kg
  ~ Mapegum WPS 5 kg drums.
  ~ Shower Waterproofing Tape 10m roll.

£55.36 ex vat
£66.43 inc vat
in stock
Description
Videos
Features
Specification
Attachments

Easy-to-use kit containing everything required to waterproof a shower in one tub. 

Waterproofing indoor floor and wall surfaces that are not subject to rising damp or in permanent water immersion. Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material. Shower Waterproofing

Kit may be used on the following:
Moisture-resistant plasterboard, gypsum plaster, cementitious render & tile backer boards.
Existing ceramic finishes after the application of Eco Prim T Plus primer (Neat).

Ready to use.
Rapid application.
Floor coverings may be installed after 12 - 24 hours.
Excellent elongation properties.
No reinforcement is required.
Some application examples: Waterproofing walls and floors in bathrooms and shower cubicles before laying ceramic tiles, natural stone and mosaic. Waterproof kitchen walls and floors, and worktops before laying ceramic
 tiles and natural stone.
 

Contents:
  ~ Shower Waterproofing Kit Primer 0.5kg
  ~ Mapegum WPS 5 kg drums.
  ~ Shower Waterproofing Tape 10m roll.

Consumption: Shower Waterproofing Kit is designed to waterproof approximately 4m², equivalent to an 800x800mm corner shower enclosure. 

After installing the Shower Waterproofing Kit wait:
- 12-24 hours on absorbent substrates
- 4-5 days on substrates which are not absorbent. Lay the tiles using an adhesive from the MAPEI range (such Keraquick S1, Adesilex P9 or Keraflex Maxi S1); the width of the joints depends on the size of the tiles to be laid.

Grout the tile joints using Ultracolor Plus, Keracolor FF or with Kerapoxy or Kerapoxy CQ, available in a variety of colours Expansion joints must be sealed using either Mapesil AC or Mapesil LM silicone sealants.

Mapegum WPS:
Consistency: paste
Colour: Light grey
Density (g/cm³): 1.45
pH: 9.0
Dry solids content (%): 73
Application Data (at +23°C - 50% R.H.):
  ~ Application temperature range: from +5°C to +35°C
  ~ Waiting time between the first and second coat: approx. 60 min
  ~ Waiting time before installing waterproofing coating or tile finish :12-24 hours
  ~ Completely dry (1 mm of thickness) at +23°C: 5 hours

Shower Waterproofing Primer:
Consistency: liquid
Colour: Light blue
Density (g/cm³): 1.01
pH: 8.5
Dry solids content (%): 18
Application Data (at +23°C - 50% R.H.):
  ~ Application temperature range: from +5°C to +35°C
  ~ Waiting time between the first and second coat: approx. 30 min-2 hours**
  ~ Waiting time before installing waterproofing coating or tile finish: 30 min-2 hours**
  ~ Completely dry (1 mm of thickness) at +23°C: 5 hours
 
Storage: Up to 24 months in original packaging. Protect from frost.


Related Products