Tilemaster FlexiLevel Fibre Reinforced Flexible Self Levelling Compound 25kg
25kg Bag
Coverage: 25kg will cover 5.25m² at a depth of 3mm
Min Depth: 2mm
Max Depth: 50mm
Tile After: 3h
Tilemaster FlexiLevel is a fast setting, flexible and fibre reinforced self levelling compound. Tilemaster FlexiLevel has been specially formulated to allow the product to be poured to depths between 2mm – 50mm in one application and receive foot traffic after 3 hours.
Tilemaster FlexiLevel is suitable for a wide range of both commercial and domestic applications. Tilemaster FlexiLevel is suitable for use over a wide range of substrates including sand/cement screeds, concrete, flooring grade asphalt/bitumen, ceramic, porcelain and natural stone tiles and timber substrates – the minimum application depth onto timber substrates is 4mm.
Tilemaster FlexiLevel is also ideal for encapsulating electric underfloor heating elements and for use over underfloor heated screeds.
The fast setting properties of Tilemaster FlexiLevel allows for ceramic tiles to be laid after as little as 3 hours, and decorative floor coverings to be installed after 24 hours.
Under certain conditions, Tilemaster FlexiLevel is suitable for use externally. For further information please contact the Tilemaster Technical team on 01772 456831 or email [email protected] for further information.
ADVANTAGES:
- Install tiles after 3 hours and decorative floor coverings after 24 hours
- Apply from 2 – 50mm in one application
- Ideal for use above underfloor heating systems
- Ideal for timber substrates
- No additives required – simply mix with water
- Low odour
- Protein free
IDEAL FOR:
- Sand/Cement Screed
- Concrete
- Plywood Overlay (6mm min)
- Electric Underfloor Heating
- Water/Wet System Underfloor Heating
- Tile Backer Boards
- Existing Ceramic, Porcelain and Natural Stone Tiles*
- Flooring Grade Asphalt & Bitumen
- Anhydrite Screeds
- T & G Floorboards
- Floating Floors
- Existing Vinyl Tiles*
- Steel/Metal Surfaces*
- Epoxy DPM*
- Existing Adhesive Residues
- Fibreglass*
- *Refer to Technical Data Sheet