Ultra Floor Screed It Ultracem Fibre Modified Cement Binder Fast Drying 20kg Full Pallet (48 Bags Tail Lift)
48 x 20kg Bags
Fast Drying
High strength
Shrinkage Compensated
Internal & External Applications
Fibre-reinforced
Bag Size: 20kg
48 x 20kg Bags
UltraCem is a fibre-modified hydraulic binder that, when mixed with graded aggregates and water, can produce a rapid drying high strength screed ready to receive floor finishes such as ceramic/natural stone tiles, wood, lino, carpet etc. between 24hrs and 4 days. UltraCem can be used to form screeds that are bonded, unbonded or floating and suitable for use with underfloor heating. UltraCem formulated screed meets the requirements of BS8204-1.
Can accept light foot traffic after 12 hours and receive floor coverings after 24 hours.
For highly trafficked areas such as hospitals, shopping centres, warehouses and airports etc.
Rapid reinstatement where early trafficking or overlay is required.
Suitable for underfloor heating systems.
Suitable for internal and external use.
Compatible with thin cementitious systems such as UltraFloor levellers and thin resin coatings.
Patching and repairing
Suitable for use where BRE screed test category A or B is required.
Fast Drying
High strength
Shrinkage Compensated
Internal and External applications
BS 8204-1 compliance
Fibre-reinforced
Coverage: Consumption varies depending on the thickness of the screed and the dosage of UltraCem. For doses of 250kg of UltraCem per m³ of aggregate consumption is 2.0 - 2.5 kg/m²/mm of thickness. Consumption rate is dependent on ratio, aggregate type/size and grading used.
Light Foot Traffic: 24 hours
Full Traffic: 7 days
Drying Time: 7 days per 25mm (in good conditions)
Application temperature (°C): 5 to 35
Density of mix (kg/m3): 2100
Pot life of mix (minutes): 60
Light foot traffic (hour): 12
Application of ceramic tiles (days): 1
Application of natural stone (days): 2
Application of vinyl and wood (days): 4
Application of leveller (days): 1 to 4 depending on depth.
Bag Size: 20kg