.jpg)
.jpg)
Ultra Floor Suppress It Single Component Two-Coat Moisture Vapour Suppressant 5L
Water Based, Solvent Free Formulation
Single Component
Removes The Need To Prime
Coverage: 16.5m² Based On Two Coats
Pigmented Orange For Coverage Control
Size: 5L
UltraFloor Suppress IT is a single component, two-coat rapid drying moisture suppressant primer membrane. It has a water-based, solvent-free formulation and is designed to suppress residual construction moisture – up to 95% relative humidity in cementitious subfloors (when tested with a properly calibrated surface hygrometer in accordance with BS 8203). Thus allowing earlier installation of floor coverings. The product is pigmented orange enabling easy identification and coverage control in applied areas.
Specifically designed for use over a variety of substrates including concrete floors, sand/cement screeds and most absorbent construction materials. It is not suitable for use with very dense substrates. When the product is to be used with underfloor heating (please contact UltraFloor Technical Services for further information). NOTE: UltraFloor Suppress IT should not be used in projects where hydrostatic pressure is a concern. In such cases, the use of pressure relief drainage and/or external tanking systems must be the primary method of protection against moisture.
Water-based, solvent-free formulation
Single component
Up to 95% RH protection
Removes the need to prime
Coverage: approx 16.5m² based on two coats
Resealable bottle, eliminating waste
Pigmented orange for coverage control
Cleaning: Any tools and equipment can be cleaned using warm water immediately after use.
Storage: To be kept out of direct sunlight and should be stored at temperatures between 5°C - 30°C at all times. If allowed to freeze, UltraFloor cannot guarantee product performance.
Shelf Life: A minimum of 12 months when stored between 5°C- 30°C
Coverage: 16.5m² Based On Two Coats
Colour: Orange
Size: 5L