.jpg)
.jpg)
DEVIreg 130 series Thermostat WHITE 140F1010
16 AMP Thermostat
Temperature Scale Adjustment
LED Indicators
Possibility To Be Installed Directly To Walls
Can Be Used For Outdoor Applications
Wire Temperature Sensor Included
DEVIreg™ 130 is a simple electronic 16 Amp thermostat with the possibility to be installed directly on the wall. The thermostat has only one button for adjusting the temperature and for OFF mode. Furthermore, it has an LED indicator showing standby (green light) and heating (red light) periods. The thermostats do not have wire sensor failure monitoring. Wire temperature sensor included in the set.
DEVIreg™ 130 is equipped with a wire (floor) sensor used for control of Comfort Floor Heating applications. The thermostat has a dial for adjusting the temperature setting with a numeric scale from 5 (meaning from OFF, 5 °C to 45°C and each step corresponds to approx. 9°C). This type of thermostat can be used for outdoor applications too – Ice and Snow Melting on the Ground, Frost Protection on Roofs, Pipe Tracing, etc., because it doesn’t have wire sensor failure monitoring.
Operation Voltage: 220-240V, 50/60Hz
Standby Power Consumption: Max. 5W
Resistive Load: Max. 16A (3680 W) @ 230V
Inductive load: Max. 1A, cos φ = 0,3
Hysteresis: ±0, 2°C
Ambient Temperature: -10°C to +30°C
Frost protection: 5°C
Cable Specification Max: 1 x 4mm² or 2 x 2,5mm²
Ball Pressure Test Temperature: 75°C
Pollution Degree: 2 (Domestic Use)
Controller Type: 1 C
Storage Temperature: -20°C to +65°C
IP Class: IP30
Protection Class: Class II
Dimensions (H/W/D): 82 x 82 x 36mm
Weight: 90g
