Buy & Tilemaster Setaflex Standard Set S1 Adhesive Grey 20kg Online

T: 01604 439300
E: [email protected]
Mon-Fri: 07:15 - 19.00
Sat: 08.00 - 12.00
Tools & Trim
  • Free UK delivery
    on most orders over £250 net*
  • Worldwide delivery
  • Finance Available
    on orders over £250
Buy now, pay over time with Deko

Tilemaster Setaflex Standard Set S1 Adhesive Grey 20kg

Standard Set S1

Colour: Grey

Bag Size: 20kg

Internal & External Use

Extended Pot Life of 3 – 4 hours

Ideal For Use With Underfloor Heating Systems

20kg Will Cover 5.5m² @ 3mm Thin Bed Application

£11.05 ex vat
£13.26 inc vat
in stock

Tilemaster Standard Set Setaflex is a polymer-modified, flexible standard setting cement-based wall and floor tile adhesive with increased adhesion and non-slip properties. Formulated to give an extended pot life of approximately 3 - 4 hours, Tilemaster Standard Set Setaflex is ideal where longer working times are required.

Tilemaster Standard Set Setaflex has been specially formulated for fixing a large variety of tiles including ceramic, porcelain and natural stone tiles to substrates subject to limited movement and/or vibration such as plywood overlay, timber framework and underfloor heating systems as well as for fixing to solid substrates such as concrete and sand/cement screed.

Tilemaster Standard Set Setaflex is ideal for areas subject to prolonged or permanent wet conditions such as swimming pools and wet rooms. Tilemaster Standard Set Setaflex can be used internally and externally and is unaffected by frost after setting.

- Genuine S1 flexibility making it highly suitable for a wide range of tiles and substrates
- Extended pot life of 3 - 4 hours – ideal where longer working times are required
- Suitable for fixing ceramic, porcelain and natural stone tiles
​- Developed for fixing to timber substrates
- Ideal for use with Underfloor Heating Systems
- Improved slip resistance, ideal when fixing large format tiles
- Ideal for swimming pools & wet rooms
- 3mm – 12mm bed depth
- Internal & External use

- Ceramics
- Porcelain
- Marble
- Travertine
- Limestone
- Slate
- Granite
- Terracotta
- Mosaics
- Quarry​

- Sand/Cement Screed
- Concrete
- Plywood Overlay (12mm min)
- Electric Underfloor Heating
- Water/Wet System Underfloor Heating
- Tile Backer Boards
- Gypsum Plaster
- Tile Backer Boards
- Existing Ceramic, Porcelain and Natural Stone Tiles
- Flooring Grade Asphalt & Bitumen
- Anhydrite Screeds
- Plaster
- Plasterboard
- Fibre Cement Sheets
- Cement/Sand Render
- Concrete Brick/Block
- Existing Vinyl Tiles

Standard Conformity: Conforms to EN 12004 C2 TE S1
Minimum Application Temperature: 5ºC
Bed Thickness: 3mm – 12mm
Coverage: 20kg will cover approximately 5.5m² with a 3mm solid bed application
Pot Life: 3 - 4 hours at 23ºC
Before Grouting: Approximately 24 hours depending on temperature and substrate. 
* The set time will be increased at lower temperatures and reduced at higher temperatures
* Tiling onto an impervious substrate with a non-porous tile will increase the set time.
Working Temperature of Cured Adhesive: -40ºC to 90ºC
Storage: Store unopened, clear of the ground in cool, dry conditions
Shelf Life: Stored correctly this product has a shelf life of 6 months
Colour: Grey
Pack Size: 20kg
*Note All work must be carried out in accordance with British Standard Code of Practice for floor and wall tiling BS5385

Related Products