Isomat Flowcret 1-10 Rapid Polymer Modified Self Levelling Compound Grey 25kg
Fast-setting, self leveling, polymer-modified cementitious screed
Used for smoothing and leveling concrete or mortar floors before laying finishing materials like ceramic tiles, moquettes, parquet, vinyl tiles etc.
Used at a thickness of 1-10 mm.
This is for a single bag, multiples can be ordered
Pallets also available
25kg
Fast-setting, self leveling, polymer-modified cementitious screed.
Used for smoothing and leveling concrete or mortar floors, before laying finishing materials like ceramic tiles, moquettes, parquet, vinyl tiles etc.
Used at a thickness of 1-10 mm.
Ideal for quick repairs, as it is walkable after 2 hours.
Can be covered after 24 hours.
Classified as CT-C40-F7-AR0,5 according to EN 13813.
Substrate
The substrate must be dry, statically sufficient and also free of dust, grease, loose particles etc. Primarily, the surface is primed with the acrylic primer UNI-PRIMER. Product application follows once the primer has completely dried out (approx. after 2 hours). Primer consumption: 200-300 g/m2.
Application
FLOWCRET 1-10 EXPRESS is gradually added into water under continuous stirring, until a homogeneous, lump free, fluid mass is formed. The mixture is left about 2-3 minutes to settle and is then stirred again for 1 more minute. A low speed electric mixer (approx. 300 rpm) is recommended for mixing. The mortar is poured onto the primed substrate in one layer and is spread to the desired thickness with a large metal trowel, squeegee etc. As soon as the product has self levelled it must be rolled immediately with a suitable spiked roller to release all the air retained within its mass. For greater layer thickness, up to 30 mm, it is recommended to use FLOWCRET 3-30 EXPRESS.