.jpg)
.jpg)
Kerakoll Aquastop Fabric Anti-Cracking Waterproof Membrane 1m2
Ideal As An Anti‑Cracking Waterproofing System
Quickly Bonds To All Substrates With Gel Adhesives
Suitable For Internal & External Use
Very Low Thickness
Resistant To Alkalis And Chemical Aggression
Size: 1m²
Polyethene vapour barrier waterproofing membrane coated on both sides with high adhesion polypropylene fabric for waterproofing damp environments and environments with high vapour presence before laying ceramic tiles, porcelain tiles, mosaics and stone materials with gel adhesives. Ideal as an anti‑cracking waterproofing system/composition for areas with moderate stress.
Aquastop Fabric can be quickly bonded to all substrates with gel adhesives from the H40 range in order to create a waterproof vapour barrier resistant to alkaline environments and chemical aggressions in uses with higher humidity and the presence of water vapour.
- Very low thickness, pre‑formed polymeric waterproofing protection totally waterproof, it provides a vapour barrier.
- Specific for waterproof laying with H40 Gel and Advanced in Vapor Pro Laminate.
- Reduces on‑site working times: waterproofing and laying of coverings with gel adhesives without waiting, it withstands foot traffic immediately.
- Resistant to alkalis and chemical aggression.
- Anti‑fracture, high elasticity to expansion/tearproof, it reduces the stress.
Appearance: Green Membrane
Width/length: 100cm / 30 Linear Metres
Mass≈ 282 g/m²
Thickness: Polyethylene Sheet ≈ 290 μm, total ≈ 530 μm
Maximum Tensile Strength:
- longitudinal ≥ 117 N/15 mm (s=3.99) DIN ISO 527-30
- Transversal ≥ 66.6 N/15 mm (s=2.76) DIN ISO 527-30
Maximum Tensile Dilation:
- Longitudinal 25%
- Transversal 26%
Equivalent Vapour Permeability Value Sd: 122 m (EN 1931)
Water Penetration Classes: W0-I – W2-I (DIN 18534)
