.jpg)
.jpg)
Larsen Brush-Joint 360 Grout 15kg Tub (Choice Of Colour)
Larsen Brush-Joint 360 is a ready-to-use, high-quality, brush-in jointing product for all types of paving. Its advanced, permeable formulation is suitable for use all year round. Brush-Joint 360 is ideal for use with concrete, natural stone and porcelain paving.
Brush-Joint 360 is suitable for use with most paving materials in foot traffic areas. All paving must be sufficiently stable and rigid so as to not move under load. Paving must be installed on a full, semi-permeable, free-draining mortar bed. A typical example is a 6:1 mortar made with clean sharp sand (or pea gravel) and cement and enough water to ensure that the bedding mix just holds together in a ball when squeezed gently in a clenched (gloved) hand. When installing new paving, ensure the narrowest part of the joint is not less than 3 mm wide. Some paving materials may be prone to staining. Always test an inconspicuous area first. To avoid any potential, temporary staining thoroughly pre-soak the area before application.
Colours: Black, Grey & Buff.
Joint Widths: 3 - 20mm.
Joint Depth: Minimum depth of 20mm is recommended ( Deeper joints will take longer to cure )
Application Temperature: 5 - 30°C.
Curing Time: 24 - 48 hours ( Depending on site conditions ) Lower temperatures and damper conditions may lengthen curing time.
Coverage: 15m² Per tub based on 600 x 600mm slabs with 20mm deep 10mm wide joints.
Storage & Shelf Life: Store in sealed containers in dry conditions, protected from extremes of temperature. Part used containers – add enough water to cover the surface by about 50mm. Pour-off excess water before re-use and blend with any new product opened to avoid colour variations. Up to 2 years shelf life in unopened manufacturer’s packaging.