Lithofin KF Protective Impregnator 1L
For Initial Treatment Of New Floors With Polished & Sensitive Surfaces
Ready-To-Use
Odourless
Ideal For Polished Porcelain Tiles
Coverage: Up To 50 m² per litre
Size: 1 Litre
For fully vitrified porcelain and other ceramic tiles (KF). Lithofin KF Protective Impregnator is a water-based nearly odourless impregnator consisting of a combination of high-quality water and oil-resistant components.
This special impregnator penetrates into the micro pores of ceramic surfaces and effectively protects tiles and grout lines against staining by inhibiting the penetration of water, oil, grease and dirt. Lithofin KF Protective Impregnator does not affect the appearance of the surface while making it less sensitive and easier to maintain.
The surface to be treated must be completely clean and dry. For best results, treat the surface in sections of approx. 15m² at a time. Shake Lithofin KF Protective Impregnator well before use. Apply undiluted with a clean cloth or a lambs wool applicator and ensure even distribution by wiping over the surface several times. After 10 to 20 minutes, completely remove any surface residues with a squeegee and then with a dry cloth. Check the surface for any residues, since these cannot be removed once fully cured. On large surfaces, Lithofin KF Protective Impregnator can be applied with a sprayer and then immediately distributed evenly with a sponge. Product residues can be removed with a polishing machine and an absorbent pad.
Please Note: Splashes on wood, glass, varnished surfaces, etc. should be wiped off with a moist cloth immediately. Application tools can be cleaned with water. Always test the product in an inconspicuous area.
Application (Surface) Temperature: 10 to 25°C
Drying Time: Floors can be walked on after approx. 2 hours, and fully dried out after 24 to 48 hours.
Coverage: Up to 50m² per litre, depending on the absorbency of the surface.
Storage: Keep closed and cool. Shelf life of up to 3 years. Open containers should be used without delay.