Mapei Mapecem Fast Drying And Setting Cement For Floor Screeds 20kg
Fast Drying And Setting Cement For Floor Screeds
Ideal Fast Track Solution
Workability Time: 20-30 minutes
light Foot Traffic After 2-3 hours
Colour: Grey
Size: 20kg Bag
Coverage: Consumption is 3.5-4.5 kg/m² per cm of thickness
Mapecem is a special hydraulic binder, which, when mixed with graded aggregates and water, has the extraordinary capacity to harden in just a few hours and to dry perfectly at whatever thickness within 24 hours (residual moisture less than 2% water by weight). Because of these characteristics and very high mechanical strength, Mapecem is the ideal fast-track solution allowing ceramic tiles to be installed within 3-4 hours and ready to receive resilient floor coverings such as vinyl, rubber, carpet etc within 24 hours.
Where to use:
Preparation of bonded, unbonded and floating screeds on existing and new slabs for the installation of wood, PVC, linoleum, ceramic tiles, carpeting or any other flooring where fast-drying is required for minimum downtime.
Some application examples:
• Preparation of screeds set to light foot traffic after 2-3 hours and perfectly dry after 24 hours, for the installation of parquet and resilient flooring.
• Preparation of screeds ready to receive ceramic tiles and natural stone after only 3-4 hours.
• Patching and repairing screeds in areas subject to continuous traffic (supermarkets, hospitals, airports, etc.).
• Preparation of screeds incorporating underfloor heating systems.
Consistency: powder
Colour: grey
Bulk density (kg/m³): 1,300
Dry solids content (%): 100
Recommended mixing ratio: 350-450kg of Mapecem with 1m³ aggregates (from 0 to 8mm diameter) and 80-160kg of water, depending on the moisture in the aggregates.
Density of the mix (kg/m³): 2,200-2,250
Duration of mixing: 3-4 minutes
Open time of mix: 20-30 minutes
Application temperature range: from +5°C to +35°C
Set to light foot traffic: 2-3 hours
Ready for use: 24 hours
Ready for levelling: after 4 hours
Waiting time before installation: 3 hours for ceramic tiles and stone material 24 hours for resilient coverings and wood
Residual moisture after 24 hours (%): < 2
Coverage: Consumption varies depending on the thickness of the screed and the amount of Mapecem. For 350-450kg of Mapecem per m³ of aggregates, consumption is 3.5-4.5 kg/m² per cm of thickness.