.jpg)
.jpg)
Mapei Mapeheat Thermo Touch Programmable Thermostat
Large Display
Touch Screen
Easy Navigation
An “In Wall” Mounted Thermostat
Motion Sense Technology
Programmable
Colour: Gloss Black Finish
Mapeheat Thermo Touch is an “in wall” mounted gloss finish programmable thermostat for the Mapeheat floor heating systems.
Features & Benefits:
• Large clear display.
• Intelligent leaf button: - Changes operating modes - Turns the thermostat ON/OFF - Saves changes - Energises the thermostat when in standby mode (motion sense technology)
• Built-in 4-event timer function.
• 2 operation modes.
• Manual on/off programme (1 temperature set-point)
• 1 editable pre-programme (4 temperature set-points per day)
• 3 Sensor modes: - Room sensing only - Floor sensing only - Room sensing mode with floor temperature limiter.
• Easy navigation.
• Manufacturers limited 2-year warranty.
Supply Voltage: 230 VAC (+10% / -15%) – 50Hz.
Relay Output: 230 VAC, maximum 13A resistive load (max. 3000W)
Power Consumption (Stand-by): 3VA
Ambient Operating Temperature: 0°C to +40°C, 5% to 95% RH (non-condensing)
Switching Hysteresis: 1K (Factory settings adjustable between 0.5 - 2.0K)
Terminals: Max. 2.5mm².
Protection Class: IP 21.
Sensor: External floor sensor (range +5°C to +35°C)
- With 3-meter cable (max. extension 100 m with 2 x 1.5mm²)
- Type NTC 10K at +25°C Internal room sensor (range +5°C to +40°C)
Transport - Ambient Temperature: –10°C to +60°C.
