.jpg)
.jpg)
Weber Weberset Trade S1 Rapid Set Flexible Adhesive White 20kg Half Pallet (25 Bags Tail Lift)
Half Pallet 25 x 20kg Bags
Rapid Setting
Flexible
Cement Based Adhesive
Suitable For Floors & Walls
Interior & Exterior Use
Colour: White
Bag Size: 20kg
Coverage: Approximately 1.5kg Per m² For Every 1mm Of Bed Thickness
Half Pallet 25 x 20kg Bags
Weberset Trade S1 is a rapid-setting, flexible, cement-based floor and wall tile adhesive, available in grey or white for interior and exterior use.
It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely.
Uses:
For fixing ceramic, porcelain and natural stone tiles:
- Walls and floors.
- Interior and exterior.
- Heated screeds.
- Overboarded wooden floors.
- Low porosity tiles or substrates.
- Tiling onto existing tiles.
Please Note: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs.
Exceeds the requirements of BS EN 12004 for C2FT-S1.
Bed thickness: 3 – 6mm (may be exceeded in small areas only).
Coverage (approx.):
- 9 kg/m² (solid bed, 6mm thick).
- 4.5 kg/m² (solid bed, 3mm thick).
- 3.0 kg/m² (using a notched trowel with 6 x 6mm.
- Notches at 12 mm centres).
Open Time: 10 minutes.
Working Time (pot life): 30 minutes.
Set Time: 2 hours – light foot traffic, full load after 24 hours.
Temperature Resistance: –10°C to 100°C and frost resistant when set.
Water Addition:
- 5 litres per 20kg for use as a pourable adhesive.
- 4 litres per 20kg for normal floor tiling.
- 3.4 litres per 20kg for non-slip wall tiling.
Particle Size: Up to approx. 0.5mm.
Storage & Shelf Life: When stored unopened in a cool dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture.