Buy Self Levelling Compound & Ardex ARDITEX CL PLUS+ Fibre Reinforced Moisture Tolerant Levelling & Smoothing Compound 20kg Online

T: 01604 439300
E: [email protected]
Mon-Fri: 07:15 - 19.00
Sat: 08.00 - 12.00
Tools & Trim
  • Free UK delivery
    on most orders over £250 net*
  • Worldwide delivery
     
  • Finance Available
    on orders over £250
 

Ardex ARDITEX CL PLUS+ Fibre Reinforced Moisture Tolerant Levelling & Smoothing Compound 20kg

A Fibre Reinforced Levelling & Smoothing Compound

Outstanding Flow, Adhesion And Moisture Resistant Properties

Suitable For Use Under Damp Proof Membranes

Walkable In As Little As 2 Hours

For Internal Use

Size: 20kg Powder & 4.8kg Latex

Coverage: Approximately 4m² @ 3mm Thick Per Unit

£25.20 ex vat
£30.24 inc vat
in stock
Description
Specification
Attachments

ARDITEX CL PLUS+ is a fibre-reinforced levelling and smoothing compound with outstanding flow, adhesion, and moisture-resistant properties. ARDITEX CL PLUS+ is walkable in as little as 2 hours and most floorcoverings can be installed after as little as 8 hours.

For levelling and smoothing the most common internal subfloors such as concrete, cement/sand gypsum (anhydrite) screeds, flooring grade plywood, ceramic tiles and flooring grade asphalt. ARDITEX CL PLUS+ can be laid from a feathered edge up to 10mm in a single application or up to 30mm by incorporating ARDEX Coarse Aggregate. NOTE: ARDITEX CL PLUS+ should not be used on top of rubber, linoleum, cork or moisture-sensitive floorcoverings.

- Apply directly to most substrates without priming, including old adhesive residues and bitumen, ARDEX Damp Proof Membranes and ceramic tiles.
- Unaffected by moisture and can be used directly to damp concrete.
- Walk on after 2 hours and install floorcoverings in as little as 8 hours.
- Can be used on heated screeds.

Bulk Density Of Powder: approx. 1.9kg/litre.
Compressive Strength: After 28 days Greater than 16 N/mm².
Flexural Strength: After 28 days Greater than 7 N/mm².
ARDITEX CL PLUS+: Cementitious screed material for use internally in buildings.
Thicknesses: The standard mix is suitable for applications from a feather edge up to 10mm, however for thicknesses above 10mm the incorporation of up to an equal volume of ARDEX Coarse Aggregate will prove economic.
Storage & Shelf Life: ARDITEX CL PLUS+ powder has a storage life of not less than 12 months if stored in dry conditions. ARDITEX CL PLUS+ latex has a storage life of 6 months in a sealed container if stored in frost-free conditions, out of direct sunlight.


Related Products