Ardex ARDITEX CL PLUS+ Fibre Reinforced Moisture Tolerant Levelling & Smoothing Compound 20kg Full Pallet (40 Bags Tail Lift)
Full Pallet 40 x 20kg Bags & 4.8L Bottles
A Fibre Reinforced Levelling & Smoothing Compound
Outstanding Flow, Adhesion And Moisture Resistant Properties
Suitable For Use Under Damp Proof Membranes
Walkable In As Little As 2 Hours
For Internal Use
Size: 20kg Powder & 4.8kg Latex
Coverage: Approximately 4m² @ 3mm Thick Per Unit
Full Pallet 40 x 20kg Bags & 4.8L Bottles
ARDITEX CL PLUS+ is a fibre-reinforced levelling and smoothing compound with outstanding flow, adhesion, and moisture-resistant properties. ARDITEX CL PLUS+ is walkable in as little as 2 hours and most floorcoverings can be installed after as little as 8 hours.
For levelling and smoothing most common internal subfloors such as concrete, cement/sand and gypsum (anhydrite) screeds, flooring grade plywood, ceramic tiles and flooring grade asphalt. ARDITEX CL PLUS+ can be laid from a feathered edge up to 10mm in a single application or up to 30mm by incorporating ARDEX Coarse Aggregate. NOTE: ARDITEX CL PLUS+ should not be used on top of rubber, linoleum, cork or moisture-sensitive floorcoverings.
- Apply direct to most substrates without priming, including old adhesive residues and bitumen, ARDEX Damp Proof Membranes and ceramic tiles.
- Unaffected by moisture and can be used direct to damp concrete.
- Walk on after 2 hours and install floorcoverings in as little as 8 hours.
- Can be used on heated screeds.
Bulk Density Of Powder: approx. 1.9kg/litre.
Compressive Strength: After 28 days Greater than 16 N/mm².
Flexural Strength: After 28 days Greater than 7 N/mm².
ARDITEX CL PLUS+: Cementitious screed material for use internally in buildings.
Thicknesses: The standard mix is suitable for applications from a feather edge up to 10mm, however for thicknesses above 10mm the incorporation of up to an equal volume of ARDEX Coarse Aggregate will prove economic.
Storage & Shelf Life: ARDITEX CL PLUS+ powder has a storage life of not less than 12 months if stored in dry conditions. ARDITEX CL PLUS+ latex has a storage life of 6 months in a sealed container if stored in frost-free conditions, out of direct sunlight.