Lithofin MULTI-SEAL Water Based Sealant (Choice Of Size)
A water-based product that is ready to use and contains a combination of high-quality natural waxes and additives.
Lithofin MULTI-SEAL forms a natural satin sheen protective film, which prevents water, dirt and oil from penetrating into the surface making it easier to maintain. Rough surfaces become scuff resistant, smoother and therefore easier to clean. Surfaces maintain their natural colour, the overall appearance is improved through a satin sheen.
For sealing natural stone such as slate, limestone (rough and honed) as well as quarry tiles, concrete stone, concrete slabs and terracotta. Formulated as a finishing treatment after impregnation with Lithofin MN Stain-Stop, Lithofin KF Stain-Stop or any other suitable Lithofin impregnator. Not suitable for outdoor use.
Please Note: Always try the product in an inconspicuous area prior to use. Always treat the entire surface. The surface temperature should be between 5°C and 25°C. Avoid or immediately remove splashes from wood, glass, varnish and other sensitive areas. Do not walk on the surface until it is dry. Clean application equipment with water.
Application Temperature: Between 5°C and 25°C
Drying Time: Dry after about 4 hours. Resilient after about 24 hours. Completely dry and hard after about 48 hours.
Coverage: Approx. 7 - 12m² per litre depending on the surface.
Storage & Shelf Life: Keep closed, cool and dry. Frost-free. Shelf life of up 2 years. Open containers should be used quickly.
Available In: 1L & 5L Bottles