Mapei Mapeheat Uncoupling Waterproof Membrane (Choice Of Size)
A Lightweight Uncoupling, Anti-Fracture And Waterproofing Membrane
For Electrical Underfloor Heating
Designed To Speed Up The Installation
Works Well With Remodelling Projects
Less Than 6mm Thickness
Available In 5m² & 15m²
Mapeheat Membrane is a lightweight uncoupling, anti-fracture and waterproof membrane for electrical underfloor heating. This patented membrane is designed to speed up the installation of tile and stone in interior rooms such as bathrooms, kitchens and living areas where the luxury of radiant floor heating is desired. Mapeheat Membrane’s thin prole works well with remodelling projects where the new floor will be installed directly over a pre-existing one. Once the heating cable is set within Mapeheat Membrane’s rounded square reliefs, a tile adhesive or levelling/ smoothing compound can be applied immediately.
Where To Use:
• Use under ceramic, porcelain and natural stone tiles in interior residential spaces such as kitchens, bathrooms, shower floors and living areas.
• Use as a substrate for self-levellers under engineered wood, luxury vinyl tiles, luxury vinyl planks, laminate flooring and mosaic tile.
Application Examples:
For the installation of Mapeheat Cable heating over:
• Concrete cured for a minimum of 6 weeks.
• Sand: cement screeds cured for a minimum of 7 days and capable of supporting tile installation traffic without leaving any indentations.
• Tile adhesives and levelling/smoothing compounds
• Tile backer boards – see manufacturer’s installation guidelines
• Exterior grade plywood at a minimum thickness as outlined in the local standards
• Existing, well-bonded ceramic tile and dimensionally stable natural stone
• Existing, firmly bonded existing luxury vinyl tiles.
• Existing, cement terrazzo floors.
Consult MAPEI’s Technical Services Department for installation recommendations regarding substrates and conditions not listed.
Colour: Blue.
Length: 5m.
Width: 1m.
Material: Polypropylene.
Thickness: 5.5mm.
Weight Of Non-Woven Polypropylene Bottom Layer: 50 g per m².
Weight Of Polypropylene Membrane: 750 g per m².
Physical State: Membrane.
Application Temperature Range: +10°C to +35°C.
Coverage: 5 x 1m roll - 5 m².